User's Manual

API Internal Document – Company Confidential Information

Page 5of 5

Figure 3.

Testing the RFID Module

1. Apply power and wait for the unit to boot up.

2. Enter Diagnostic Mode:

a. Hold the F1 key until the display shows: DIAGNOSTIC PIN

b. Enter the PIN number by pressing the following keys: 415049<ENT>

c. Press 1 (BADGE)

d. Press 1 (RAW DATA)

3. Hold the test badge near the front plate of the reader until it displays: PROX SUCCESS.

4. Verify the number displayed matches the number printed on the test card.

5. This completes test of the module.