User's Manual

TA-500 Badge Reader (DSI Version 2.0-2.3) Confidential – API Healthcare Corporation

3. Install the ferrite. With 10" of network cable in front of the ferrite, wrap the remaining cable 3 times

around the ferrite. Close the ferrite.

4. When an electrical box is used, insert the ferrite in the box.

5. Route the Ethernet cable through the entry on the back panel.

6. Mount the back plate to the Electrical box or wall with the 2 supplied screws.

7. Connect the Ethernet cable to the device. Verify information displays on the display window to indicate

the device has power.

8. Slowly lower the unit onto the back plate until the unit is firmly attached.

9. Using the Security Key, tighten the security screw to prevent device from being removed from the wall.