Installation Manual

49
Confidential – API Healthcare Corporation Procedures
Copyright © 2006. All rights reserved. 2008-04-29
Reset Device
• Supervisor Menu, option #7 Diagnostics, #9 Reset, #2 Reset Device.
• Telnet Menu, option #2 Advanced Menu Options, option 2 Restart Device.
• Disconnect power to the device.
Server IP Port on Device
• Supervisor Menu, Option #2 IP Settings, #8 Remote Port.
• Telnet Menu, Option #2 Advanced Menu Options, #2 UDP, press Enter to reach the prompt 'Please
Enter the UDP remote port' option. Enter the value and press Enter to use the default settings for the
remaining prompts.
Sound
• Use the TA-500 Administrator to enable/disable the beeps. Use the Update Reader Configuration
option. The default is sound is enabled.
Terminal ID
• Configure within the Communication software. This value is automatically updated to the device.
Time Display Mode
• Supervisor Menu, option #6 Time Mode.
• Use the Communication software to configure the Time Display Mode.