Installation Manual

Confidential – API Healthcare Corporation Procedures

REMOVING CLOCKINGS FROM TRAINING DEVICE

To configure a device for training purposes, configure as you would for any live device.

Badgings occurring during training are typically not posted to the live environment. To prevent any badgings from

being posted in the system, the device needs to be de-activated within the communications software. A device can

hold approximately 1500 badgings before it becomes full.

After a period of time, a training device may become full or need to be used in the live environment. To ensure the

badgings in the device are not posted to the live environment, perform the following to remove the information from

the device.

1. Access the Supervisor Menu on the device by depressing the F1 key until the display changes from 'Present

Badge' to 'Supervisor PIN'.

2. Enter the PIN and press the ENT key. The default PIN is '415049'.

3. Press 7 to access the Diagnostics Menu.

4. Press 6 to access the Memory Test.

5. When prompted to Erase All? press 2 for Yes.

6. Press ENT to Exit the Supervisor Menu.

The device is now ready for use. The following information remains unchanged on the device.

• Date and Time

• Prompts

• Network Configuration

• Badge Format