Installation Manual

8
TA-500 Badge Reader (DSI Version 2.0-2.3) Confidential – API Healthcare Corporation
Installation and Configuration Guide Copyright © 2006. All rights reserved.
DEVICE SPECIFICATIONS
Display 2 line by 16-character negative mode Liquid Crystal Display.
Clock Dallas DS1307 Real-Time Clock (1):
56 Bytes SRAM (Battery Backed)
Storage 1500 clockings
Keypad Includes digits 0-9, clear key (CLR) enter key (ENT), and four additional function keys
Card Magnetic Stripe: ABA/ISO2, track 2 used
Bar Code: 3 of 9, Interleaved 2 of 5, Code 128 Infrared reader
Proximity: Contact API Healthcare for additional information.
Badge Thickness Magnetic and bar code badges only: 0.76 +- 10%mm.
Battery Panasonic CR2032 3.0V. 3 year life.
The back-up battery is designed to maintain the on board clock only. This battery does
not have sufficient power to accept any badge entries.
Communication IEEE 802.3 Auto-sensing 10/100 Base-T network interface
Full or half duplex(auto-sensing)
Environment 0-40°C (32-104°F), 20-80%RH, indoor, No Condensing
Power TA-500 is IEEE 802.3af compatible (requires a power adapter for Endspan operation)
TA-500 requests a Class 3 Power level
Power supplied by Power Over Ethernet (PoE).
Power source is by Line Injector (used when PoE is not available) or PoE enabled port.
Line Injector: Input: 100-240V, 47-63Hz, 1.0A.
Output: 48VDC, 270ma
Power Cord: 6ft, 3-prong
Power Switch None
Dimensions Height: 5 7/8" (149.225mm) Width: 5 1/4" (133.35mm)
Depth: 2"(50.80mm) Weight: 1.0 lbs (0.45 kg)
Case UV protected high density plastic.
Accessories (2) Mounting Screws, (2) Anchors
(1) Security Case Screw (API Healthcare Part: SESS01010)
(1) Security Key (API Healthcare Part: SESK01010)
(1) PoE Endspan to Midspan Adapter (API Healthcare Part: TADON1010)
(1) PoE Line Injector w/power cord (API Healthcare Part: TAPS01010)
Reader Stand (optional) (API Healthcare Part: FINES1010)
Ferrite (API Healthcare Part: SEFBC0101)