User manual

T25 Tube Compressor API Select
2
Important Safety Instructions
1. Please read these instructions
2. Keep this information in a safe place
3. Do not use this device near water
4. Clean only with a dry cloth
5. This product uses high-voltage vacuum tube technology. To avoid a potentially-lethal
shock, handle it with care. Never open the lid when the unit is on.
6. Wait at least 5 minutes after the unit has been unplugged before opening the lid to
replace tubes. Reinstall lid before powering.
7. Do not block any ventilation openings
8. Do not stick object(s) through the top, side or front panel vents.
9. Allow at least 1U of empty rack space above the unit for tube ventilation.
10. The rear panel is a heatsink and will get warm. Leave at least a few inches of space
around the rear panel area to allow for proper power supply cooling. Do not touch the
rear panel surface for an extended period of time when the unit is powered on.
11. Do not install near any heat sources such as radiators, heat registers, stoves, or other
devices that produce heat
12. Do not defeat the safety purpose of the polarized or grounding type AC plug
13. Protect the AC power cord from being walked on or pinched
14. Use only attachments/accessories specified by the manufacturer
15. Unplug this device during lightning storms or when unused for long periods of time
16. Refer all service to qualified personnel
ATTENTION: Exposure to extremely high noise levels may cause
permanent hearing loss or damage. Individuals vary considerably
in susceptibility to noise-induced hearing loss, but nearly everyone
will lose some hearing if exposed to sufficiently intense noise (this
may include music) for a period of time. Be safe.
WARNING – To reduce the risk
of fire or electric shock, do not
expose this apparatus to rain
or moisture.