User manual

T25 Tube Compressor API Select
10
8.0 Power Switch & Rear Panel Connections
8.1 Power Switch
The power switch for the T25 Tube Compressor is located on the right side of the front panel.
Power: Toggle to power the T25 ON and off
NOTE: The T25 is a tube-based processor that requires 15 minutes for the
tubes to warm-up to a stable temperature before tonal qualities become
consistent.
8.2 Rear Panel
The rear panel of the T25 Tube Compressor provides audio inputs and outputs for both channels
connections, as well as AC power connection, voltage selection, and fuse.
8.2.1 Audio Connections
Each audio channel, Left and Right, has an INPUT and OUTPUT connection.
IMPORTANT NOTE: The XLR and ¼” INPUT
connectors are wired together, so use
only one INPUT connection a time.
IMPORTANT NOTE: Care should be taken not to
short the outputs, as damage will occur
to the output stage.
8.2.2 AC Power
The AC power connection, fuse, and voltage selection switch is located on the rear panel of the T25.
115/230V~: Voltage selection switch
Fuse: 0.5A/0.25A 250V
• 115VAC value factory installed
• Change to appropriate value for 230VAC operation
AC Power Connection: Standard IEC power cable