Specifications

COMPLETE REVISION
PIP ELSSG01
October 2004 Design and Fabrication of Low-Voltage Metal-Enclosed AC Power Circuit Breaker Switchgear
Process Industry Practices Page 13 of 14
TABLE 1 - SUPPLIER DRAWING AND DATA REQUIREMENTS FOR
LOW-VOLTAGE METAL-ENCLOSED SWITCHGEAR
A B C D DESCRIPTION
X X X One-line diagram, three-line diagram, control elementary, and
connection diagrams
X X X X General layout of equipment, showing all dimensions, weights,
and required clearances.
X X Circuit breaker data, including detailed description of breakers,
rated insulation level (BIL), and rated short-circuit current.
X X X Bus data, including the insulation and bracing materials and
methods
X X Current transformer data, including type, class, accuracy, and
saturation curves
X X Potential transformer data, including the type, class, and
accuracy
X X X Detailed plans and elevation drawings showing location of all
components
X X X Solid-state trip unit data, including the model number, technical
information, and time-current curves
X X Meter data, including the model number and technical
information of all meters and transducers
X Certified type test reports
X X Foundation loading diagrams and soleplate details
X X X Individual cell schematics
X X X Individual cell connection wiring diagrams
G D D Detailed (D) or general (G) bill of material including name of
the manufacturer and catalog number of all components
X(1) Installation, operation, and maintenance manual
X Recommended spares parts list
A. These documents shall be provided with proposal.
B. These documents shall be provided for purchaser's review and authorization
to proceed before fabrication.
C. These documents shall be provided as part of the final certified document
submittal.
(1) One additional set of installation, operation, and maintenance manuals
shall be included with the equipment when shipped.
D. The final as-built shall be provided within 2 weeks following shipment.
Comment
: One reproducible set of drawings shall be provided plus the
specified number of copies of all documentation and operating
manuals as indicated on the purchaser’s
PIP ELSSG01D
Data
Sheet. Format for final as-builts reproducibles shall be CAD
convertible .DXF electronic format unless other wise indicated
on the purchaser’s
PIP ELSSG01D
Data Sheet.