Specifications

PIP ELCGL01
November 2002 Electrical Design Criteria
Process Industry Practices Page 3 of 20
1. Introduction
1.1 Purpose
This Practice defines general requirements and the basis for the design of the
electrical system for a process industry facility.
1.2 Scope
This Practice is limited to the definition of general design requirements for electrical
systems. It shall be used along with other design specifications provided by the
owner for the project and shall be used with the referenced documentation to develop
the detailed system design.
2. References
Applicable requirements in the latest edition (or the edition indicated) of the following
industry standards and Process Industry Practices shall be considered an integral part of this
Practice. Revision (or edition) of codes, standards, and specifications in effect at the
inception of the project shall apply for the duration of the project. Short titles will be used
herein if appropriate.
2.1 Process Industry Practices (PIP)
Note: - Where a company has adopted a PIP Practice with changes, deletions, or
additions, such modifications shall take precedence over the base PIP Practice.
– PIP ELEHA01 - Engineering Procedure for Developing Electrical Area
Classifications
– PIP ELIGD000 - Grounding Installation Details
– PIP ELIMT000 - Motor Installation Details
– PIP ELIMTN00 - Motor Installation Details - Nameplate
– PIP ELIMTS00 - Motor Installation Details - Stand
– PIP ELIMTT00 - Motor Installation Details - Terminal Box
– PIP ELSAP01 - Battery Chargers for Station Batteries
– PIP ELSAP03 - Design and Fabrication of Online Ferroresonant
Uninterruptible Power Supply System
– PIP ELSAP04 - Design and Fabrication of Online Pulse Width Modulated
Uninterruptible Power Supply System
– PIP ELSAP11 - Design and Fabrication of Flooded-Cell Lead-Acid Batteries
for Electrical Stations
– PIP ELSAP12 - Design and Fabrication of Valve Regulated Lead-Acid
Batteries for Station Application
– PIP ELSAP15 - Design and Fabrication of Flooded-Cell Lead-Acid Batteries
for Uninterruptible Power Supply (UPS) Application