Specifications

16201-13
L:\wpb_\wpb_emp1\W1200.13\p.m. Project #1\SECTION 16201-Indoor Generator and ATS.doc
2. Test shall utilize resistive load banks for the full load. Minimum
load shall be equal to the nameplate rating of the engine/generator
set in kW. Generator Supplier shall supply all load banks
equipment necessary for connecting generator to load banks.
Supplier shall provide all labor and material to perform test.
3. Proper operation of controls, engine shutdown and safety devices
shall be demonstrated.
4. Should these tests indicate that the equipment does not meet the
specified performance requirements, National Electrical Code and
local codes, the cost of all corrective measures shall be borne by
the Supplier.
3.03 STARTUP AND INSTRUCTION
A. Before start up, the Supplier shall provide the services of an on site
technician to confirm proper connection of external equipment. If
acceptable to the Supplier and the Owner, the unit may be start up tested.
B. The Owner, the generator Supplier shall provide start up assistance and
coordination as required.
C. Operating and maintenance procedures shall be explained to the Owner’s
personnel by the Supplier’s factory trained representative.
D. A minimum of one manday shall be provided for instructing the Owner’s
staff in the care and maintenance of the unit. Training shall be provided
by the Supplier.
E. Proper operation of controls, engine shutdown and safety devices shall be
demonstrated.
3.04 SYSTEM SERVICE CONTRACT
A. Supplier shall make available to the Owner, this standard service contract
which the Owner may or may not choose to exercise. This contract is
separate from the warranty requirements contained herein.
3.05 SCHEDULE OIL SAMPLING
A. The Supplier of the equipment must provide a quarterly oil sampling
analysis for a period of one year form the date of acceptance. This
scheduled oil sampling shall be of the atomic absorption
spectrophotometry method as opposed to the spectrographic analysis
method and shall be accurate to within a fraction of one part per million
for the following elements: