Instruction manual

4
Sensit®Gold G2 instruments are constructed of durable high
impact ABS plastic to withstand the rigors of field use.
Incorporated in the hand grip area is the battery compartment.
All Sensit®Gold G2 instruments require 3 “C” type alkaline bat-
teries. APPROVED BATTERIES: PROCELL® MN 1400 batter-
ies provide approximately 13 hours of use.
The tick can be easily heard with the speaker located in the
back of the instrument.
PRODUCT FEATURES
(Continued on page 5)
BACKLIT
GRAPHIC DISPLAY
SPEAKER
(ON BACK)
WARNING LEDs
16” FLEXIBLE
GOOSENECK
IR COMMUNICATION
LUER PROBE
CONNECTOR
SENSOR CAP WITH
WATER/DIRT FILTER
LEAK/PPM/LEL
SENSOR
PUSH PAD
BUTTONS
BATTERY
COMPARTMENT
ALL OTHER
SENSORS &
PUMPS (INTERNAL)
PRODUCT FEATURES continued from page 4
An infrared communication window is located on the right
side to allow the Sensit®Gold G2 instrument to download cali-
bration data, readings the operator has elected manually to save
to the on board memory, as well as communicate with the Smart-
Cal Calibration Station and PCI-2s computer interface.
A flexible gooseneck is used to assist in locating the source
of gas leaks and remote sampling. A water/dirt trap is located at
the end with a convenient luer style connector to attach sam-
pling and probe accessories.
A graphic display continuously updates the operator of all avail-
able gas concentrations and alarms simultaneously as well as
indicates internal functions such as air flow and battery power.
Below the display is a series of LEDs that are preset to indicate
combustible gas concentrations. The red LED on the right side
will flash during any alarm condition. In darkened environments
the backlight will illuminate in red during alarm conditions.
There are 3 operational button pads on the front of all
Sensit®Gold G2 instruments.
• POWER/MUTE BUTTON (A): Operates POWER and MUTE
features and exit menu items.
• TICK/MENU BUTTON (B): Operates the Tick Rate Control,
Bar Hole Test and to enter, change and select menu items.
• SAVE/ZERO BUTTON (C): Use for save data feature,
manually zero sensors, scroll and change menu items.
5