Instruction manual

32
33
EXPERT MENU FEATURE DEFINITIONS
EXPERT USER FEATURE CHART
*OPTIONAL
CONTRAST: Set display contrast for better viewing
TICK: Set normal speed of tick rate when resetting
%LEL MODE: Set to LEL display. If off readings are %V/V
100% LEL: Set the value of LEL between 4-5% methane
LEL RESOLUTION: Set reading increments on display
N COMP: Specialized sensor compensation software
CAL DUE REMINDER: Alert system for calibration
DUE ACK: Requires operator to push a button when cal is overdue
PROPANE 100%: Requires calibration to 100% propane
N2 for O2: Requires oxygen test using N2
SHOW SES LOG: Show the session log on display
SHOW BH LOG: Show bar hole test logs on display
SHOW CF/CO LOG: Show CO and CF test logs on display
ALARM SETTINGS: Limits for alarms
LOW LED: Concentration when first LED illuminates
POWER OFF: Automatic shut off time
PURGE TIME: Run time before instrument shut down after power off
BH TIME: Adjustment for the bar hole test time
CO TIME: Adjustment for the CO test time
ERASE AUTO: Erase the AUTO LOG
NG FACTOR: Factor for methane content in 100% natural gas
NSR: Disable gas distinguishing software
NSC: Disable combustible/inert identifier
NSC LEL: Concentration to activate NCS control
AUTO BUMP: Enable required bump test
TICK FIRST: Position of tick in menu
MUTE LATCH: If in mute, unit can remain until reactivated
ERASE LOG: Erase all sessions, BH, CO, CF Logs
CAL RQD: Set instrument to shut down after “Cal Past Due”