Instruction manual

16
(continued on page 17)
CALIBRATION CHECK continued from page 15
does not update the calibration due date. Full calibration is re-
quired to update these times.
A calibration past due message will illuminate during warm-up if
calibration has not been performed per your company specified
interval. Any time it is suspected that the Sensit®Gold G2 is
not working properly, check calibration.
The Sensit
®
Gold G2 has several categories within the User
Menu. The first nine fields are standard with all instruments. The
last three are only available in certain instrument models when
ordered with the Extended Memory option.
SHOW TIME: Displays current date and time. (Cannot be
changed from this location.)
SET TIME: Set date and time. Displayed using a 24 hour clock.
(User adjustable)
BUMP TEST: Perform automatic test for sensors response to
calibration gas within 60 seconds or less.
SMART-CAL: Configures instrument for operation and place-
ment into automatic calibration station.
CAL: (not CALIBRATION) Remove SMART-CAL communication
and replace with “access AUTO CAL manual calibration proce-
dures.
O2 TEST: 20 second test to check depletion of the O2 sensor
when exposed to the proper gas, such as 100% methane.
GAS TYPE: Select natural/methane or propane as primary gas
to be sensed.
17
(continued on page 18)
MENU continued from page 16
CAL LOG: Display last calibration of all sensors.
SES LOG: Display saved gas readings with the corresponding
date and time.
PRINT: Print Session Logs, Cal Log, access Smart-Cal com-
munication, (print CO test or print CF test is optional with some
extended memory units).
CAL DUE: Displays both future due dates and past due dates
for calibration.
SHOW BH LOG: Display the results from most recent BH tests.
Standard LOG size is 6 events but up to 100 records can be
stored per session, BH Test, CO Test and CF test.
NOTE: These additional fields are found on certain mod-
els ordered with the Extended Memory option.
AUTOLOG: Automatic storage of peak gas readings of up to
1,600 events.
SHOW CO TEST: Display CO levels recorded during timed test.
SHOW CF TEST: Display calculated AIR FREE CO levels re-
corded during timed test.
SHOW TIME
From the working display, access the menu by pressing and
holding the TICK/MENU BUTTON (B) until the display reads
USER MENU SHOW TIME. Press TICK/MENU BUTTON (B)
one time to display the time and date. Press any button to re-
turn to the USER MENU.
MENU