Instruction manual

INSTRUCTION MANUAL 1-7-2010 REV. 6-21-10 V 2.5
SENSIT TECHNOLOGIES
851 Transport Drive
Valparaiso, IN 46383
Phone: [phone]
Fax: [phone]
US Toll Free: [phone]
www.gasleaksensors.com
Your Sensit®Gold G2 is warranted to be free from defects in
materials and workmanship for a period of two years after pur-
chase (excluding calibration and batteries). The circuit board
and percent gas sensor (TC) are warranted for 5 years. If within
the warranty period, your instrument should become inoperative
from such defects, the unit will be repaired or replaced at our
option. This warranty covers normal use and does not cover dam-
age which occurs in shipment or failure which results from alter-
ation, tampering, accident, misuse, abuse, neglect or improper
maintenance. Proof of purchase may be required before war-
ranty is rendered. Units out of warranty will be repaired for a
service charge. Internal repair or maintenance must be com-
pleted by a SENSIT Technologies authorized technician. Viola-
tion will void warranty. Units must be returned postpaid, insured
and to the attention of the Service Dept. for warranty or repair.
This warranty gives you specific legal rights and you may have
other rights which vary from state to state.
SENSIT Technologies
851 Transport Drive
Valparaiso, IN 46383
Phone: [phone]
888 4 SENSIT (473-6748)
Fax: [phone]
www.gasleaksensors.com
Warning:
To prevent ignition
of flammable or
combustible
atmospheres,
disconnect power
before servicing.
SENSIT®GOLD G2
For use with combustible gases
and optionally available
oxygen and toxic gases.
INSTRUCTION MANUAL
Read and understand
instructions before use.
WARRANTY