User guide

Restart Scenarios
80 Avaya 1600 Series IP Deskphones Installation and Maintenance Guide
application file to replace the boot code. The following message displays while the
application file is downloaded into RAM:
where n is the number of KBs downloaded.
The following message displays while the application file is stored in flash memory:
where n is the percentage of the file that was stored, and x is the number of elapsed
seconds. This usually takes longer than the file’s download.
The telephone is reset so the new system-specific application file can be executed.
Continue with the next procedure.
Latest Boot File and System-Specific
Application File Already Loaded
This happens with normal resets.
The telephone displays:
The telephone detects and displays the speed of the Ethernet interface in Mbps, that is, 0,
10, or 100. The message No Ethernet displays until the software determines whether the
interface is 10 Mbps or 100 Mbps.
app_filename
n KB received
Saving to flash
n%, x secs
Restarting...