User guide

Local Administrative Options
32 Avaya 1600 Series IP Deskphones Installation and Maintenance Guide
Set the 802.1X Operational Mode
Use the following procedure to set or change the operational mode.
1. While the telephone is on-hook and idle, press the following sequence of keys on the
faceplate of the telephone:
Mute 8 0 2 1 9 # (Mute 8 0 2 1 x #)
Note:
Note: Press the Mute button momentarily. Do not press this button while pressing other
keys/buttons.
After entry of the command sequence, the following text displays:
where the setting is the current value of the system value DOT1X (802.1X Supplicant
Mode), defined as:
● Pass-thru mode if setting = 0
● P-t w/Logoff (pass-thru with Logoff) mode if setting = 1
● Supplicant mode without pass-thru or p-t w/Logoff if setting = 2
2. Perform one of the following steps:
● If you want to change the DOT1X mode value, go to Change the DOT1X Mode Value on
page 32.
● If you want to change the DOT1XSTAT mode value go to Change the DOT1XSTAT
Mode Value on page 33.
Change the DOT1X Mode Value
Use the following procedure to change the DOT1X mode value.
1. To change the mode value, press *.
Depending on the current value, the next sequential valid mode value is selected and
displayed as the setting. For example, if the current value is pass-thru (0), pressing *
802.1X=setting
*=change #=OK