Specifications

Maxiva ULX Series

November 11, 2013

3‐25

888‐2628‐300 WARNING:Disconnectprimarypowerpriortoservicing.

3.9.3.1.3 SavedSettings

TheSystemSetupEntrybuttonallowsstorageofuptoeightsetups(0through7)forthepurposeofN+1operation.

AllthesettingsandcalibrationsforthetransmitteraresavedintheMCMmodule.Thismeansthetransmittercan

changetoanyoneofeightchannelsandbefullycalibrated

bysimplyrecallingthesetupentry.TheN+1controller

willsendtotheTCUthesetuptheentrythatneedstoberecalled,thesetupparametersincludefrequencyof

operation.

Figure 3-28 System Saved Settings

SystemSetupEntry,Enteranumberfrom0to7inthisfield.Thenumberthatisenteredinthisfieldwillbethe

storagelocationforallchangesmadetoindividualsetupsettings.Thechangesarestoredautomaticallyasthe

changesaremade.Typicallythefactoryusessetupentry0.

Forexample,ifyouwanttosetupthetransmitterforCH29andstoreitinentry3,youenter3intheSystemSetup

EntryandthencompletetheCH29setupbychangingfrequency,powerout,andcalibration.Thechangesare

automaticallysavedassetting3asthechangesare

made.

Caremustbetakennottooverwriteprevioussetupsincaseswhereatransmitterissetuptooperateontwo

differentfrequencies.OnlypressSaveSetupwhenacompletesaveofallparametersisrequired.

Caution

TRANSMITTER FREQUENCY SHOULD ONLY BE CHANGED IF THE FILTER

AND RF SYSTEM COMPONENTS ARE TUNED FOR THE NEW FREQUENCY.

SaveSetupandRecallSetupButtons

WhenasystemsetupiscompletedtheSaveSetupbuttonispressedtosavethatsetuptotheMCMboardEEPROM.

PressingtheRecallSetupbuttonrecallsthenumberedsystemsetup entryfromtheMCMEproms.

SaveBackupandRecallBackupButtons

WhentheSaveBackupbuttonispressed,alleightsystemsetupentries(thecontentsoftheMCMEEPROM)are

savedtotheMCMcompactflashcard.Thiscardcanberemovedandtransferredtoanothertransmitter,a

replacementMCMcard,ortoareplacementTCU.

TheRecallBackupsoftbuttoncanbeusedtomovesetupfilesontheflashdrivetoMCMEEPROM.

ToFigure3‐25