Specifications

Section-3 Operation
November 11, 2013
3‐8
Copyright©2013,HarrisBroadcast
WARNING:Disconnectprimarypowerpriortoservicing. 888‐2628‐300
b. TransmitterForwardpoweroutputreadinginnumericalformat(formultiplecabinettransmittersthis
wouldbeasystempowerreadingandnotforasinglecabinet).Itisimportanttonotethatthisisthepower
outputafterthefilter.
c. TransmitterForwardpoweroutputreadinginabargraphformat.The100%markisbasedonthenominal
powerlevelorTPO(T r ansmitterPowerOutput)enteredintotheconfigurationscreen.Thebargraphwill
alsoturnyellowifthepowerlevelishigherorlower(usersetsvalues)thanthenominal100%level.
Note
Indications on the global display header in Figure 3-6 should be all green under normal (no fault) operat-
ing conditions. A yellow or red symbol or status indication on the global display header should be investi-
gated by the station engineer.
3.3.4 GUIMenuStructures
Figure3‐7liststhescreenswhichcanbeaccessedviatheGUI.Thistreemaybehelpfulwhenlearningtonavigate
thescreens.TheblockontheleftrepresentstheHome(main)Screen.Subscreenscanbeaccessedusingoneofthe
softwarebuttonsontherightsideoftheGUIHomeScreenorthevarioussubscreenswhichhavesoftwarebuttons
ontherightside.
Note
Multi-cabinet Maxiva series transmitters will require an extra button press at the top level menus to select
the desired cabinet.