Specifications

Appendix-a Cutting & Soldering Transmission Line
November 11, 2013
a‐8
Copyright©2013,HarrisBroadcast
WARNING:Disconnectprimarypowerpriortoservicing. 888‐2628‐300
a.5.1 Alternate Cleaning Method
Thefollowingisanalternateproceduretocleanthesolderedtransmissionline.Thefollowingmaterialsareneeded.
• WaterandHose
• SmallPaintBrush
• RubberGloves
• ScotchBritePadorBBQGrillCleaningPadWithHandle
• NavalJelly(orequivalentrustremover).
Warning
NAVAL JELLY CONTAINS PHOSPHORIC ACID AND CAN BE DANGEROUS IF IT
COMES IN CONTACT WITH SKIN OR EYES OR IF IT IS SWALLOWED. READ AND
FOLLOW THE PRECAUTIONS AND EMERGENCY PROCEDURES ON THE NAVAL
JELLY CONTAINER BEFORE USING.
1. Aftersolderingtheflange,diptheendofthelineintowaterorsprayitwithahoseuntilitis
cool.
2. Usingasmallpaintbrush,applyacoatingofNavalJellytothetorchblackandfluxscaleon
theoutsideandinsideoftheline.LettheNavalJellysetfrom10to20minutes.
3. ScrubthelinewithScotchBriteortheBBQGrillpadtoloosenthetorchblackandfluxscale.
4. FlushwithwateruntiltheNavalJellyresidueisgone.
5. Repeattheprocessuntilallthetorchblackandfluxscaleisremoved.
ThefirstapplicationoftheNavalJellywillremovethetorchblackandsomeofthefluxscale.Normally,ifvigorous
scrubbingisdone,repeatingtheprocessasecondtimewillcompletelycleantheline.