Specifications

Maxiva ULX Series
November 11, 2013
5‐3
888‐2628‐300 WARNING:Disconnectprimarypowerpriortoservicing.
Copyright©2013,HarrisBroadcast
5.2.2 PAModuleRemoval
Figure 5-1 PA Module Location
SeeFigure5‐1toidentifymodulenumbersandtheirlocationsinthecabinet.PAandIPA(driver)modulescanbe
removed(orinstalled)whilethetransmitterisoperating,butthefollowingstepsshouldbefollowed:
STEP 1 Prepareaclearpathtoalocationtoplacethemoduleonceithasbeenremoved.
STEP 2 Openthereardoor.
STEP 3 TurnoffcorrespondingPAmodule circuitbreakerontheleftrearsideofthecabinet.
Caution
THE PA MODULES MAY BE HOT. ALLOW THE MODULE TO COOL BEFORE
REMOVAL.
RedundantDrivers
RedundantPre‐DriverA
ApexM2XExciterB
PASlots11‐18
ApexM2XExciterA
RedundantPr e‐DriverB
PASlots1‐8
TCUSystemController
IPAA(slot10)
11
18
A
B
8
1
IPAB(slot9)