Specifications

Maxiva ULX Series
November 11, 2013
3‐29
888‐2628‐300 WARNING:Disconnectprimarypowerpriortoservicing.
Copyright©2013,HarrisBroadcast
3.9.3.3.1 SNMPConfiguration
Figure 3-33 SNMP (Simple Network Management Protocol) Config screen
Table3‐14TCUHome>System>Service>Network>SNMPConfig
Field Explanation
Port
Entertheportnumbertobeused.Choicesare161and8170through8179.Port161isthe
default.
Protocol Choiceis’UDP’or’TCP’.
RO(readonly)Community Thisisauserdefinedpasswordwhichallowsa’set’tobeperformed.Defaultis’private’.
RW(readwrite)Community Thisisauserdefinedpasswordwhichallowsa’set’tobeperformed.Defaultis’private’.
SNMP
Versionchoicesare:V1orV2C.
Version1:Thetrapwhichissenttellsofanoccurrenceofaneventbutgivesnodetails.
Version2C:Thistraptellsofanoccurrenceofaneventandgivesdetailsconcerningit.
TrapIP
AtrapisalistofvariableswhicharesenttothetrapIPaddressspecifiedhere.FiveTrapIP
addressescanbeentered.
ToFigure3‐34
ToFigure3‐32