Instruction manual

188

Exit Conﬁgure

Press the encoder in and the display will change to the

metering screen.

Rear Panel

Microphone Inputs

Each microphone input is a locking female XLR (pin #1 ground, pin # 2 ‘+’ and

pin # 3 ‘-‘). Maximum input level is +21dBu with Pad engaged and the input

gain at 26dB.

Line Level Output

The channel outputs appear on a 25 pin D-Sub female connector using the Tas-

cam analog standard pin out. Maximum output level is ﬁxed at +21dBu. Note:

The analog output of each channel can be internally ( See page 15) selected to

be either ‘post’ or ‘pre’ variable gain ampliﬁer. In the ‘post’ mode the output

will be aected by the Pad, Low Cut and Polarity Reverse as well as the vari-

able gain ampliﬁer. In the ‘pre’ mode the output will be aected by everything

except the variable gain ampliﬁer. The ‘pre’ mode is useful to feed a monitor

console.

ADAT Outputs 1 and 2

Each Toslink connector will output standard ADAT (audio channels 1 through

8) when SMUX is not selected. When SMUX is selected ADAT Output 1 will

have audio channels 1, 2, 3 and 4; and ADAT Output 2 will have audio channels

5, 6, 7 and 8.

Page 9Aphex Model 188