Manual

2
Automation Products Group, Inc.
1025 West 1700 North Tel. 1/888/525-7300
Logan, UT 84321 USA Fax 1/435/753-7490
w w w . a p g s e n s o r s . c o m
s a l e s @ a p g s e n s o r s . c o m
PG-2000 Digital Pressure Gauge
APG
Automation Products Group, Inc.
®
■
Specications
Performance
Standard Pressure Ranges: See table at right
Overpressure: 2x full scale
Burst Pressure: 10x full scale or 20,000 psi (whichever is less)
Accuracy (linearity & hysteresis): ±0.25% of full scale (B.F.S.L.) or 2 digital counts, whichever is
greater; NIST traceable certification also available
Stability - One Year Zero Drift: 15-5: < ±0.5% F.S., 316: < ±1% F.S.
Thermal Zero Shift > 100 psi: ±0.02% F.S./°F
100 psi: ±0.04% F.S./°F
Thermal Sensitivity Shift > 100 psi: ±0.02% F.S./°F
100 psi: ±0.04% F.S./°F
Life: 10 million cycles minimum
Environmental
Compensated Temp: 20 to 130°F (-7 to 54°C)
Storage Temp: -40 to 160°F (-40 to 71°C)
Operating Temp: 0 to 160°F (-18 to 71°C)
Electrical
Batteries: Standard 9 V (1), user replaceable (2-year life typical with auto off option)
External Power: 10-32 VDC
Display Type: 4 digit LCD, 0.5 in. digits
Display Resolution: 1 part in 2000
Low Battery Detection: Displays “LBAT” @ 4.0 VDC ±5% with Vin = 9.0 VDC
Adjustments: Front accessible “Z”: Zero Adjust; “S”: Span Adjust
Auto Off: 16 minutes
Physical
Weight: 0.36 lb.
Construction Materials
Case: Injection molded case material EMI-X
®
PDX-W-88341
Wetted Materials: 15-5 SS; 316L SS available at no extra charge (High resolution ranges under
100 psi, in 316L SS incorporate a Hastelloy
®
C276 diaphragm); One piece Hastelloy
®
fitting also
available (minimum quantities required)
External Power Connector: 1/8 in. – 3 conductor (included with optional external power selection)
External Power Mating Connector: 1/8 in. – 3 conductor (included with optional external power
selection)
Process Cavity Volume: 0.07
3
in.
Specifications are subject to change without notice.
■
Common Pressure Ranges
Range Unit of Display
Option Range Measure Resolution
20 0 to 20 psi 0.01*
100 0 to 100 psi 0.1
160 0 to 160 psi 0.1
200 0 to 200 psi 0.1
250 0 to 250 psi 0.1
500 0 to 500 psi 0.1
1000 0 to 1000 psi 1
2000 0 to 2000 psi 1
*Requires G2 option when ordering.
■
Linear Accuracy Chart
Display Standard Accuracy
Full Scale Display Resolution Linear Accuracy Options
20.00* 0.01 0.25% N0, N1
100.0 0.1 0.25% N0, N1
160.0 0.1 0.25% N0, N1
200.0 0.1 0.25% N0, N1
250.0 0.1 Better than 1% N3, N4
500.0 0.1 Better than 1% N3, N4
1000 1 0.25% N0, N1
2000 1 0.25% N0, N1
*Requires high resolution option
Note: This table lists linear accuracies for specific ranges. For an explanation of how linear accuracy is calculated, please contact APG.
■
Electrical Cable Length Table
Cable Length
W0
0 ft.
W1 2 ft. (0.6 m)
W2 5 ft. (1.5 m)
W3 10 ft. (3 m)
W4 25 ft. (7.6 m)
W5 50 ft. (15.2 m)