Owner manual

ManualsBrandsAPG ManualsEquipmentHammer Union Pressure Tansmitter datasheet

Intrinsically Safe Hammer Union Pressure Transmitter

The Hammer Union Pressure Transmitter is an designed for the rugged environments of land based

and offshore drilling installations including Mud Logging and Measurement while drilling.

Features

• Ranges to 20,000 psi

• 4-20 mA or 0-5 VDC output

• 1502 or 2202 tting

• Exceptional shock and vibration resistance

• ±0.25% accuracy of full scale

• CSA/ATEX/IEC Approved

Automation Products Group, Inc. www.apgsensors.com

tel. 888.525.7300 sales@apgsensors.com

Summary of content (4 pages)

PAGE 1
Intrinsically Safe Hammer Union Pressure Transmitter The Hammer Union Pressure Transmitter is an designed for the rugged environments of land based and offshore drilling installations including Mud Logging and Measurement while drilling. Features • • • • • • Ranges to 20,000 psi 4-20 mA or 0-5 VDC output 1502 or 2202 fitting Exceptional shock and vibration resistance ±0.25% accuracy of full scale CSA/ATEX/IEC Approved Automation Products Group, Inc. tel. 888.525.7300 www.apgsensors.
PAGE 2
Hammer Union Specifications *1502 Fitting 3.25” 82.5 mm 3.50” 88.9 mm 3.69” 93.7 mm 4 pin Connector 3.69” 93.7 mm Performance • • • • • • • • Accuracy (linearity, hysteresis, & repeatability): ±0.25% of full scale (BFSL) Standard Pressure Ranges: 0-20,000 psis Overpressure - 1.5 times full scale (applies to sensor only, not fitting) Burst Pressure - 3 times full scale (applies to sensor only, not fitting) Compensated Temp: -40 - 65ºC (-40 - 150ºF) Temp Effects on Zero & Span: ±0.026% FSO/ºC (±0.
PAGE 3
Options Part Number: HU - _____ - IS - _____ - PSIS - _____ - _____ - _____ A B C D E A. Output □ L24 □ L27 D. Fitting 4-20 mA with Cal Shunt 0-5 VDC B. Pressure Range □ 5K □ 6K □ 10K □ 15K □ 20K 0 - 5,000 psis 0 - 6,000 psis 0 - 10,000 psis 0 - 15,000 psis 0 - 20,000 psis C.
PAGE 4
HU Hammer Union Pressure Transducer Built for the Toughest Applications Automation Products Group, Inc. brings you the highest quality hammer union pressure transducer on the market. There’s a reason why so many are switching to the HU hammer union pressure transducer from APG. We always use a NACE compliant nickel alloy and welded construction for the toughest applications in Oil & Gas drilling and production. Next time you need a hammer union pressure transducer, call us at (888) 525-7300.