Specifications

DMS26 – BvNET Technical brochure V 1.0 2
1. DMS26
Digital system processor
Analogue 2-in/6-out
24-bit 96 kHz D/A and A/D converters
50 configurable presets
Features
Sonic transparency
Dedicated APG presets
PWAPG remote control software
Ease of use
System management and processing for all APG systems,
with or without subwoofers
Digital delay
Pre-EQ of all APG loudspeakers
Signal zoning and distribution
Specifications
Bandwidth: 10 Hz - 40 kHz
Dynamic range >112 dB
High and low-pass filters Off, 10 Hz to 25.4 kHz,
1/36 octave steps
Crossovers: Bessel, Butterworth, Linkwitz Riley,
Hardman
Delay 400 ms on inputs, 80 ms on outputs
Limiter Threshold adjustable by 0.2 dB steps
6-band parametric EQ on each input and output
Lock-out function for front panel control
Serial Port
2. PWAPG software
Overview
The PWAPG software provides instant access to all of the
editable parameters via a simple yet highly intuitive graphic
user interface.
It is also a powerful remote control tool which enables
control of up to 119 DMS26 devices simultaneously over a
BvNet network. In turn this enables the transfer of presets
between the device and a PC, either to save existing
presets onto a PC, or to load new ones into the device.
The software also provides access to functions and
information that are not available from the front panel,
such as firmware updates, device-cloning, the “Mute All”
function, cut-and-paste, and delay distance in meters.
Minimum requirements
- PC (or Mac with PC emulation)
- 32-bit OS (Windows NT, 2000, XP or Vista)
- CD reader or internet access
- RS232 or USB* port
*requires an adapter.
NB – the network runs faster via RS232, hence this is the
recommended method of connection.