user manual User guide

Rev. A3, 10/08 DCR-WEB
13
Automation Products Group, Inc.
APG...Providing tailored solutions for measurement applications
Tel: 1/888/525-7300 • Fax: 1/435/753-7490 • www.apgsensors.com • sales@apgsensors.com
Outputs
The DCR-WEB contains 2 relays which are capable of handling a 5 A load.
These relays have programmable BEGIN and END points as well as TYPE of
operation. The relays can also be jumpered NO (default) or NC. *see drawing on
earlier page of this manual.
MODE DESCRIPTION PARAMETERS EXPLANATION
BEGRLY 1 Begin Trip 1 Units = inches Sets the begin point
Default = 24 of Trip 1.
• Straight line from inlet of press to reel or straightener exit point.
• Distance from transducer to material that is taut or no loop - condition that could
cause damage.
ENDRLY 1 End Trip 1 Units = inches Sets the endpoint
Default = 36 of Trip 1.
TYPE 1 Trip 1 Type Range = 0 - 7 Selects the type of
Default = 0 function Trip 1 will
See Trip Type Explanation for details. perform.
BEGRLY2 Begin Trip 2 Units = inches Sets the begin point
Default = 40 of Trip 2.
ENDRLY 2 End Trip 2 Units = inches Sets the end point of
Default = 48 of Trip 2.
TYPE 2 Trip 2 Type Range = 0 - 7 Selects the type of function
Default = 0 Trip 2 will perform.
See Trip Type Explanation for details.