user manual Instruction Manual

Rev. A1, 2/14 DCR-1006A Ultrasonic Controller
9
Automaon Products Group, Inc.
APG...Providing tailored soluons for measurement applicaons
Tel: [phone] • Fax: [phone] • www.apgsensors.com • [e-mail]
• Wiring
Sensor Wiring
The DCR-1006A is compable with DST and MNU series ultrasonic sensors.
MNU Standard Cable Micro-Connector
24V Red Pin 1 (Brown)
GND Black Pin 3 (Blue)
A White Pin 2 (White)
B Green Pin 4 (Black)
DST Standard Cable Micro-Connector
+ Red Pin 1 (Brown)
- Black Pin 3 (Blue)
Powering the DCR-1006A
Power to the DCR-1006A can be supplied from either 85-264 VAC or 12-28 VDC.
NOTE: terminals will source 24 VDC
when powering via AC voltage.
OR
GND
Ground
Neutral
Hot
85-264 VAC
INPUT
AC/N (-)
AC/L (+)
Powering with AC Voltage
24V
GND
Vs
OUT
DC Voltage Powered
12-24 VDC
INPUT
DST Sensor
DST
+
_
24V
GND
Vs
A (-)
B(+)
A1 (-)
B1(+)
OUT
MNU Sensor