user manual Instruction Manual

DCR-1006A Ultrasonic Controller Rev. A1, 2/14
36
Automaon Products Group, Inc.
APG...Providing tailored soluons for measurement applicaons
Tel: [phone] • Fax: [phone] • www.apgsensors.com • [e-mail]
To send all the register values as
currently listed, click “Send All”
A green window
indicates successful
communicaon.
A yellow window
indicates a communi-
caon failure.
To change an individual parameter, click on the value
you wish to change, enter the desired value, then click
the adjacent “Send” buon to implement the change.
To retrieve the register values saved
in a sensor, click “Receive All”
1500
Send
1500
Send
150000
Send
A red window indi-
cates a value outside
the allowable limits
for the parameter.