Installation Instructions

ManualsBrandsApexOne ManualsElectronicswireless take a number system

User-manual

Contact: ghytracking@hotmail.com

Skype: ghytracking

Package included

Ticket dispenser Power cable with adapter USB setup cable 2.25’’ wide thermal paper roll

Keypad USB Power cable

Display screen USB Power cable

(Setup cable is used to set dispenser parameters and setting parameters needs our

software. If you need set parameters, please add my skype.)

1. Install Paper Roll

Summary of content (5 pages)

PAGE 1
User-manual Contact: ghytracking@hotmail.com Skype: ghytracking Package included Ticket dispenser Power cable with adapter Keypad Display screen USB setup cable 2.25’’ wide thermal paper roll USB Power cable USB Power cable (Setup cable is used to set dispenser parameters and setting parameters needs our software. If you need set parameters, please add my skype.) 1.
PAGE 2
Please put paper roll like this. If there is not a paper roll or paper runs out, the dispenser will speak “NO PAPER”. 2. Power Connection and Antenna Connect number dispenser, keypad and display screen with power supply by power cable and pull out antenna of display screen.(If the antenna of display screen is not pulled out, number datas of keypad will not send to display screen in time) 3. Number Dispenser Usage Click take number button and get a number ticket as below.
PAGE 3
pressing take number button for 5-6 seconds, your queuing number will become 001 and currently waiting people will become 0 4. Keypad Usage Current number: The current number in turn. Total number: The total number which clients take. 0-9: Input 000-999 numbers on keypad +/-: Nex number/former number. You can press “+” to call next number one by one to ensure the correct queue sequence. E.
PAGE 4
There are 2 bell buttons on keypad, and their functions are same. You could repeatedly press “bell button” to keep on calling the current number. F1: Emergency Insert button. If you would like some clients to jump the queue, for example: There are 10 clients taking numbers, and you would like number 005 client to jump the queue, please press “F1” “5” “bell button”. In this way because number 005 jump the queue, therefore the number after 004 becomes 006.
PAGE 5
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.