Wireless IP Camera Quick Installation Guide 1
Packing List ●IP Camera X1 ●DC Power Supply X1 ●CD X1 ●Certificate of Quality X1 ●Warranty Card X1 ●Mounting bracket X1 ●Mounting screw X1 Key Features 1.720P HD Lens 2.Free P2P 3.Support 9 screens viewing by IE Browser 4.Remote viewing by Mobile 5.
Step 1: Hardware Installation 1. Install the antenna. 2. Plug in the right power supply. 3. Connect your camera to the wireless router (Modem or Switcher) with net cable. Screw the antenna to the back of the camera; Make sure it is attached securely.Connect your camera to the router, modem or switcher with net cable. Plug in the power. After a while, the yellow network light at the rear of the camera will blink and the camera will pan and tilt automatically. The green power light will keep on.
The method of the camera connection: 3
Step 2: Software Installation Insert the small CD to your computer CD driver, open the CD, install the following software: 1. ActiveX: Click “oPlayer”—“Next”—“Install”—“Finish”. (This is just a plugin.) 2. Search Tool: Open the CD, click ,the search tool will run automatically.( No need to install. You can copy this software to your desktop.) Every camera has an IP address, fixed or dynamic.
Attention:1. Shows the computer’s IP address information. 2. List shows the cameras which are connected in LAN. 3. Indicates the camera IP address information. Confirm that your camera “ Subnet M ask” , “ Gateway” , “ DNS Server” a r e the same with your computer’s. If not, try to modify it. You can change it manually. When you finished , click “Apply”. Click , it can help you configure an usable IP address automatically. 2.
Note: 1)If you use IE browser, please choose the first sign-in mode (ActiveX Mode) to login. If you use other browsers, such as Firefox, Safari of Google Chrome, you should choose the second signin mode (Server Push Mode).Don’t choose the wrong mode, or you will not see the video. On the other hand, using Server Push Mode, you lose functions like Recording, 2-way audio, IR control.
Step 5: DDNS Service Settings 1).Click , go to “DDNS Service Settings”. 2).Choose the DDNS server , input the DDNS user and password. 3).Submit, refresh, then DDNS status will show “DDNS Succeed”. Thus the remote address is http://G1200.vipcam.org. To make it work, you have to do port Forwarding In your router . That is, create a virtual server; put your camera IP address and port in. Step 6: Mail Service Settings and Alarm Service Settings 1). Mail service is a preparation for the alarm function.
The informations need fill out as follows: Sender:Fill out your email Receiver: Fill out your email or others email SMTP user:Fill out your email username SMTP password: Fill out your email password Note: This function works when the ip camera access network.When you use Gmail, the port should be 465, SSL should be TLS. The most important, make sure your Gmail has enabled SMTP. 2).
Record & Capture Path: Where to put the files, video and photos. (If you can’t choose this, pay attention to your PC OS and IE version, use IE browser.) Record file length: At least 100MB Record time length: At least 5 minutes. Reserved disk space: when your pc disk is less than 200MB, stop recording. Record cover: Delete the old files when the disk capacity is not enough. Step 8: Record Schedule (For HW0021, HW0024, with SD card recording function) This sector is for SD card recording settings.
Step 9:Install PC Client and Mobile App 1. For PC, install the progam in the CD, add the cameras in. 2. For Android, copy the app 3. For iPhone, iPad, go to App Store, search “E-view” to the phone, install it. “wanscam” to download “e-View”. FAQ 1.Why does my computer or security software say the software is dangerous and it is a virus? The wizard will detect device in oyur network, and it seems like a virus. Please ignore the warning and continue. 2.
The camera’s default username is admin,and please leave password blank. If you forget your username or password,you can reset the camera to factory settings to get the default username and password. 5.How can I reset the camera to factory settings? Please press the reset button under or on the camera for about 1 minute until the camera reboots.Please make sure the power supply is connected to the camera when you are doing it. 6.
Customer Service Email : support@wanscam.com Skype: tech1.wanscam Note: Certain functions mentioned in this manual may vary according to camera’s model. For example,pan and tilt function are for Pan/Tilt enabled cameras only. If you have any difficulty with the installation,please contact our customer service for help or refer to the offical website of Wanscam.
