User manual

Window: the window is defined as video window number shown in the
video region ,the current maximum of which were 36.
Resolution: the size of the currently selected video. Currently supports
two sizes: 640x480 and 320x240.
Mode: set the video light mode, and remove the jitter impact of the image
as per the electricity frequency. The following three modes are used:
50HZ/60HZ /outdoor model. Generally, indoor mode use 50Hz or 60Hz,
outdoor mode should be set as per the real camera working environment.
Effect: when the video window is greater than the specified video size,
two options will be offered, try to show the video window in center or
stretch the image to the real size of the window.
Flip: the video upside down.
Mirror: Reverse the video.
Mute: Check to close/open audio.
OSD, OSD color: Display the date/time and the color when displaying.
Connection: When the video camera window specifies IP address, click
on this button and video from the connected camera will be displayed. In
the opening pages of video surveillance, it will automatically connect the
camera and video will come.
Disconnect: Disconnect the video connection, and stop displaying video.
If video recording is ongoing, the operation will stop simultaneously.
snap: Photographing and save the photographed image.
View snap: Open image folder to view the pictures.
Start/Stop the video record: Start or stop the video record.
view the video: Open video folder and view the saved video segments.
ClearAlram/ClearAllAlarm: Stop alarm of current channel or all channels.
Video operation interface is shown as follows: