User manual

Port config
This page is used to set the camera's external ports, the
default value of 80. If you want to visit the multiple
cameras in a same local area network through WAN, in
order to distinguish different cameras, each camera
needs a different port, such as 81, 82, etc. and so on.
Alarm camera settings are used to set the alarm function of network
camera. When external alarm signal is triggered, alarm will come. The
alarm device can be high sound alarm device or sound &light alarms
device. If the user has set up e-mail function, fill in the corresponding
mailbox address to receive mail. An alarm mail will be sent to the user.
Wiring diagram is as follows.