User manual

Net Config:

IP Config

1) The set supports two modes of distribution network

address:

2) 1, to obtain IP address automatically (DHCP): Select DHCP,

device will automatically obtain the IP, which is not fixed

(this feature requires the router to support DHCP protocol,

and this feature should be activated).

3) 2, using the specified IP address (static IP): To specify the

equipment IP, it is required to manually fill in IP address.

5) Select the required mode, fill in relevant information by the

Depositary and click on the “Save” button. This function of

equipment need to restart to take effect.