User manual

1, User can customize the name of the device in order to
distinguish different equipments.
2, When the video surveillance equipment connected, the page
will show the device and the name.
3, The search tool can also display the searched device
names.
3: Net config: set up network-related parameters.
3.1: IP settings
The set supports two modes of distribution network address:
1, to obtain IP address automatically (DHCP): Select DHCP,
device will automatically obtain the IP, which is not fixed (this
feature requires the router to support DHCP protocol, and this
feature should be activated).
2, using the specified IP address (static IP): To specify the
equipment IP, it is required to manually fill in IP address.
Select the required mode, fill in relevant information by the
Depositary and click on the “Save” button. This function of
equipment need to restart to take effect.