User Manual

9 | P a g e
STEP 4-1 (Mounting your own top)
Optional: Find a separate hardware bag labeled “Anchors for top”. Install those anchors to your own top, and
follow instruction STEP 4.
Some users choose not to install anchors and simply use their own wood screws to mount Support Brackets to
the top. Those wood screws are not provided. Please check the length of the screws before mounting and make
sure that they don’t go through the top. For best stability, the underframe should be centered with support
brackets about 2” to 3” from the edge.
STEP 5
Connect controller to control box. Connect power to a wall plug. If the desk is unsteady, check all screws and
make sure they are all tight, and make adjustment to the leveling studs. Please not that minor unsteadiness is
common for all standing desks at standing height especially when it is on a hard surface like hardwood floor.