User Manual

6 | P a g e
ASSEMBLY INSTRUCTIONS
BEFORE YOU BEGIN
1. Lay out all components and hardware to ensure that you have all the parts listed on the parts on page 5.
2. Desk weighs close to 100 lbs. Two people are needed to turn or move desk and some of its components.
When turning or moving the assembled desk, grab it by UPPER SUPPORTS (not desk top).
3. Assemble on soft and non-abrasive surface to avoid scratch or damage to the desk top.
STEP 1
Lay the lower support (foot) flat on the floor and secure it to the leg with Screw E as illustrated below. Make
sure to use longer socket-headed BLACK Screw E not shorter dome-headed Screw A.
The foot is hollow. In an unlikely event that a screw or washer falls into the foot, you can get it out by
unscrewing the leveling stud and prying open the plastic ender with a flat screwdriver. You may also choose
not to do anything as extras are provided.