Manualshelf

User Manual

ManualsBrandsApexDesk ManualsFurnitureApexDesk FX-66APP-MOCHA Flex Pro 66" Series Sit to Stand Desk Memory Controller
12345678910
STEP 4: CONNECTING CABLES
Use following diagram as a guide
1) Connect Height Controller cable (7) to Control box (6).
2) Connect two motor cables to Control Box. Motor cables can be plugged into either port interchangeably.
The motor whose cable is plugged into the port next to power cord is #1 motor while the other one is #2. You
may need to switch cables at control box when troubleshooting. Please refer to troubleshooting section for
details.
3) Plug power cord to Control Box.
4) Plug power cord to a power outlet.
MAKE SURE NO OBSTACLES ARE IN THE DESK’S PATH.
MAKE SURE THE DESKTOP IS NOT TOUCHING ANY WALLS.
MAKE SURE ALL CORDS ARE APPROPRIATE LENGTH TO ACCOMMODATE THE CHANGE IN HEIGHT.
Flex Pro Series Assembly Guide 7 | Page