User Manual

ASSEMBLY INSTRUCTIONS
BEFORE YOU BEGIN
1. Lay out all components and hardware to ensure that you have everything listed on Page 4.
2. The desk weighs over 100 lbs. Two people are needed to turn or move desktop and some components.
When turning or moving the assembled desk, grab it by SUPPORT BRACKETS (not the desk top).
3. Assemble on soft and non-abrasive surface to avoid scratch or damage to the desk top.
STEP 1: INSTALLING DESK SUPPORT BRACKET
1) Unfold legs.
2) Slide in Desk Support Bracket.
3) Align outer screw holes with Desk Support Bracket, and insert 2 machine screws (E1) to each side of the leg.
4) Each leg is secured by 4 machine screws (E1) with 2 pre-installed. Make sure to tighten all 4 screws.
Flex Pro Series Assembly Guide 4 | Page