Instructions / Assembly

ManualsBrandsApex ManualsAutomotive4-Bike Pickup Truck Bed Bicycle Rack

Page 1Rev. 062518

DiscountRamps.com • 1-888-651-3431

Truck Bed Bike Rack

Instructions for Part # TBBC-4

General Guidelines

• It is the user’s responsibility to read and follow all instructions.

• Keep these instructions with the product at all times and review before each use.

• It is the responsibility of this product’s owner to furnish the instructions to any person that borrows or pur-

chases the product.

• Inspect the product before use to ensure it is assembled properly and all parts are in safe working order and

free of defects.

• Never modify this product in any way.

• All circumstances cannot be addressed in these instructions. Please use common sense and practice gen-

eral safety measures when using this product.

• Parts and/or instructions are subject to change without notice.

Part Description Quantity

A Left U-Frame 1

B Right U-Frame 1

C Left Main Rack Frame 1

D Right Main Rack Frame 1

E Frame Support Bar 2

Part Description Quantity

F Spacer Bar 2

G Bottom Support Bar 2

H Clip Pin 9

I Plastic Stopper 4

A B C D

H I

Parts

Summary of content (4 pages)

PAGE 1
Truck Bed Bike Rack Instructions for Part # TBBC-4 General Guidelines • It is the user’s responsibility to read and follow all instructions. • Keep these instructions with the product at all times and review before each use. • It is the responsibility of this product’s owner to furnish the instructions to any person that borrows or purchases the product. • Inspect the product before use to ensure it is assembled properly and all parts are in safe working order and free of defects.
PAGE 2
Assembly Step 1. Assemble the Left U-Frame (A), Left Main Rack Frame (C), and one Frame Support Bar (E). A. Slide the first section of the Main Rack Frame onto the top bar of the U-Frame until it just fits onto the bar. (The bottom of the U-Frame will have a foot.) B. Slide the Frame Support Bar onto the top and bottom sections of the U-Frame. The top of the Frame Support Bar has a wing nut and fits between the two sections of the Main Rack Frame.
PAGE 3
(Step 4 cont.) B. The bottom sections of each Main Rack Frame fit together and secure with a Clip Pin. (4B) C. After the sections are in place, tighten the wing nuts on the Frame Support Bars. Step 5. Screw the Plastic Stoppers (I) onto the long wing bolts that are on the U-Frames. The bolt and wing nut may need to be adjusted so that there is room to install the stopper. If the bolt is difficult to adjust, it may help to apply some WD-40.
PAGE 4
Product Warranty and Liability GENERAL PRODUCT WARRANTY: Products purchased from the Authorized Dealer (original place of purchase) or Merchant (“Dealer”) will be free of defects in material and workmanship at the time of receipt, and will meet the specifications stated at the place of purchase transaction or online at the Dealer’s website, under normal use and service when correctly installed, operated and maintained.