Instructions / Assembly
Page 2Rev. 062118
DiscountRamps.com • 1-888-651-3431
Parts
Part Description Quantity
A Right Upright 1
B Left Upright 1
C Right Crossbrace 1
D
Left Crossbrace
1
E
Cross beam
3
F Crossbrace Extension 1
G Left Mesh Barrier 1
Part Description Quantity
H Right Mesh Barrier 1
I Allen Head Set Screw 10
J Carriage Bolt 6
K Lock Nut (for Carriage Bolt) 6
L Allen Head Bolt 6
M Washer 6
N Lock Nut (for Allen Head Bolt) 6
A
B
C
D
E
F
G H
I J K L M
N
Assembly
Step 1. Pre-drill mounting holes into the truck bed rail. Position the mounting plate of the upright leg
as close to the cab as possible. Locate the pre-drilled hole in the footplate that is furthest from the leg
and drill a 3/8” hole through the truck’s bed rail. A second hole for a bolt must be drilled through both
the footplate and the truck’s bed rail as close as possible to the front leg without sacricing access
to the bolt underneath the truck’s bed rail. This bolt must be accessible in order to put on the washer
and nut. Repeat with the other upright.