Instructions / Assembly

Page 3Rev. 061818
DiscountRamps.com • 1-888-651-3431
Use
This roof ski carrier is designed for carrying
skis and snowboards only. Two skis/snow-
boards may be stacked with the bottoms
touching. The higher front end of the skis
should be facing the back of the vehicle for
improved aerodynamics.
To secure the skis in place, rmly close
the top of the carrier hood until it latches in
place. Lock closed. Some skis may require
that you hold down the top of the carri-
er hood and lock in place in order to stay
securely closed. Never drive without both
carriers locked closed.
front of
vehicle
3a.
3b. 3c.
Step 2. Attach the bottom clamps
to the top clamps using the M6x40
bolts and nuts. The vehicle crossbar
should be between the top clamp
and bottom clamp before securing
to x the ski carrier to the vehicle
roof. Place a nut into the indents in
the underside of the bottom clamp.
Fit the bolt into the holes in the top
clamp and bottom clamp, meeting
the nut. Tighten securely with the
4mm hex wrench.
VEHICLE CROSSBAR
2a.
2b.
2c.