Instructions / Assembly

ManualsBrandsApex ManualsOtherLarge Ski and Snowboard 75 lbs. Capacity Roof Rack

Page 1Rev. 061818

DiscountRamps.com • 1-888-651-3431

Ski-Snowboard Rack

Instructions for Part # SKI-4, SKI-6

General Guidelines

• It is the user’s responsibility to read and follow all instructions.

• Keep these instructions with the product at all times and review before each use.

• It is the responsibility of this product’s owner to furnish the instructions to any person that borrows

or purchases the product.

• Inspect the product before use to ensure it is assembled properly and all parts are in safe working

order and free of defects.

• Never modify this product in any way.

• All circumstances cannot be addressed in these instructions. Please use common sense and

practice general safety measures when using this product.

• Parts and/or instructions are subject to change without notice.

Safety

• This carrier is designed for carrying skis and snowboards only.

• Never exceed your vehicle rack recommended weight capacity.

• The carrier should always be securely locked closed before driving. Test that the carrier is locked

by pressing on the top to ensure it does not release.

• Be aware that skis may interfere with opening of a vehicle rear hatch. Use caution when opening.

• Make sure there is enough clearance for bindings before loading skis.

• Skis should only be placed front to back on the vehicle roof. Never use the carrier to transport

items sideways.

• Remove the carrier when not in use or before entering a car wash.

• Always keep track of the keys and store them in a safe place.

Summary of content (4 pages)

PAGE 1
Ski-Snowboard Rack Instructions for Part # SKI-4, SKI-6 General Guidelines • It is the user’s responsibility to read and follow all instructions. • Keep these instructions with the product at all times and review before each use. • It is the responsibility of this product’s owner to furnish the instructions to any person that borrows or purchases the product. • Inspect the product before use to ensure it is assembled properly and all parts are in safe working order and free of defects.
PAGE 2
Parts OR A E B G F C Part A B C D E H I J D Description Carrier Hood (4 or 6 capacity) Top Clamp Bottom Clamp M6x90 Hex Cap Bolt M6 Nylon Nut Quantity 2 4 4 4 4 Part F G H I J Description M6x40 Hex Cap Bolt M6 Nut 4mm Hex Wrench 5mm Hex Wrench Key Quantity 8 8 1 1 2 Assembly Step 1. Attach two top clamps to each carrier hood using the M6x90 bolts and nylon nuts. Place a nylon nut into the indent on one side of the top clamp.
PAGE 3
Step 2. Attach the bottom clamps to the top clamps using the M6x40 bolts and nuts. The vehicle crossbar should be between the top clamp and bottom clamp before securing to fix the ski carrier to the vehicle roof. Place a nut into the indents in the underside of the bottom clamp. Fit the bolt into the holes in the top clamp and bottom clamp, meeting the nut. Tighten securely with the 4mm hex wrench. 2b. 2a. VEHICLE CROSSBAR 2c. Use This roof ski carrier is designed for carrying skis and snowboards only.
PAGE 4
Product Warranty and Liability GENERAL PRODUCT WARRANTY: Products purchased from the Authorized Dealer (original place of purchase) or Merchant (“Dealer”) will be free of defects in material and workmanship at the time of receipt, and will meet the specifications stated at the place of purchase transaction or online at the Dealer’s website, under normal use and service when correctly installed, operated and maintained.