Manual

Instruction Manual ]
FUNCTIONS & FEATURES
Turn On/Off 1
1. Turn On
Plug in the supply cord, and the TV should enter the Standby mode. Pressing the STANDBY on the remote control or on
the TV can turn on the TV. Also, the power indicator light on the TV will come on.
2. Standby (Soft Off)
While the TV is on, press the STANDBY key. This will put the TV in Standby or soft off mode. The power indicator light
on the TV set will turn off.
3. Auto off when no signal received
The TV set will automatically enter into Standby mode when the following conditions are met.
1) TV is in antenna mode.
2) Current channel has no signal.
3) No key is pressed within 15 minutes.
I Basic Functions I
Changing the Channel
While in Tuner mode, press the CH +/- keys to change the channel, or use the numeric keypad to enter a new channel.
Adjusting the Volume
To increase or decrease the volume, press the VOL +/- keys. The volume adjustment ranges from 0 to 100.
Muting the Volume
To mute the volume, press the MUTE key. To restore the volume, press MUTE again.
[ Function Selection Menus J
All Function menuscan be accessedby pressingthe MENU key onthe remote control or the top panel. Navigationof the menu be
donewiththe arrowsand ENTER keys onthe remoteand- CH + and - VOL + keysonthe top panel.Exitwiththe MENU key.
Video Setting Menu
This menu allows you to adjust the various picture settings.
Access
From the Main menu screen, press the left or right arrow key until Video
Setting is highlighted. Then the Video Setting menu is displayed.
Picture Control: Press the up or down arrow key to select Picture
Contro/and right arrow key or ENTER key to access the sub menu. Use
the up or down arrow key to move between the various settings, and the
left or rightarrow key to adjust them.
Video Setting
Picture Mode Normal
Picture Control _,
Auto Black Lvl On
VSM On
I Move:_ Enter:| Exit :_EN0-]I
CONTRAST: 0 (minimum contrast) to 100 (maximum contrast)
BRIGHTNESS: 0 (dimmest) to 100 (brightest)
COLOR: 0 (minimum color) to 100 (maximum color)
SHARPNESS: 0 (minimum sharpness) to 100 (maximum sharpness)
TINT: -50 (more purplish) to +50 (more greenish)
COLOR TEMP: Cool, Standard or Warm
Picture Mode: Use the left or right arrow key to select among
User, Normal, Movie and Sports.
Auto Black Lvh This feature improves gradation of picture. Press
the left or rightarrow key to set itOn or Off after Auto B/ack Lv/is
highlighted.
VSM: This feature allows you to improve sharpness. Press the left
or right arrow key to set it On or Off after VSM ishighlighted.
Picture Control
Contrast 50
Brightness 50
Color 50
Sharpness 50
Tint 10
÷Color Temp Warm
Move: f _ ADJ: *--* Exit:[ME_7
Note:
This function is not available for PF2020, PF2720 and PF3220. For PF2030, PF2730 and PF3230, it doesn't work
in the DVD mode.
13
PF2020-Pf3230 _: 2003.5.8 )_