NDALR 250lbs Aluminum Truck Rack Fig 1
Installation Steps Part 1 Fig 2-3 Fig 2-2 Fig 2-1 Frame 2x base 2x Part 1 The purpose of part one is to assemble the frame for the truck rack. Follow the instructions below: 1. To assemble the frame you will need the “Base” and both “Frames”. 2. On the side you prefer to have the truck rack on, place a “Base” near the front and in the back corners of the bed of the truck. Note that the “Base” should be running parallel to each other on the long side of the truck.
Part 2 Fig 3 16 spring washer 2x M12X185 Socket head screw bolt 4x 16-U bolt 2x M16 nut 2x Stop bolt 2x Part 2 The purpose of part two is to secure the base and frame to the truck bed of your truck. Follow the instructions below: 1. To secure the frame you will need 2 “Stop Bolt”, 2 “16-U Bolts”, 2 “16 Spring Washer, 2 “M16 Nut” , and 4 “M12X185 Socket Head Screw Bolt” . 2. Part 2 will secure the top and bottom half of the post. The first part will secure the top half.
Part 3 Fig 4 12-U bolt 4x 12 spring washer 2x M12*75 hexagon bolt 2x M12 nut 2x Part 3 The purpose of part three is to lock the frame at a desired height. For the series of instructions below: 1. To lock in the desired height, you will need 2 “12 Spring Washer” , 4 “12-U Bolt” , 2 “M12*75 Hexagon Bolt” , and 2 “M12 Nut” 2. On the bottom half of each of the bases, there is a long slit.
Part 4 Fig 5 M12*60 hexagon bolt 6x M12 locknut 6x Parallel support frame 2x Ladder stop 1x Supporting arm 2x Part 4 The purpose of part four is to attach the support arms and their rails to the rack. Follow the steps below: 1. To attach the support arms and their rails, you will need 2 “Supporting Arm”, 2 “Parallel Support Frame”, 6 “M12*60 Hexagon Bolts”, and 6 “M12 Locknut” to attach Ladder Stop . 2. First, attach both the “Supporting Arm” and “Parallel Support Frame” to the post.
Part 5 Fig 6 Extended arm 2x M12*30 hexagon bolt 2x Part 5 Insert the Extended Arm into the Parallel Supporting Frame, and secure it with a M12*30 Hexagon Bolt.
Part 6 Fig7 Frame 2x M6 locknut 2x Tie Down Ring 2x M6 Washer 4x Part 6 Screw “Tie Down Ring” with “M6 Washer” and “M6 Lock Nut” to “Frame “.
Explosion diagram and parts list Fig 8 Parts List Item# Description Quantity 1 Frame 2 2 Base 2 3 Supporting Arm 2 4 Extended Arm 2 5 Parallel Support Frame 2
Hardware List Part Description A Pic. Quantity Part Description Pic.
