HA-RACK-V2 Steel Headache Rack
Installation Steps 1. Identify the Left Side Brace and Right Side Brace and see how these braces slide into the lower horizontal tubing of the Rack (see photos below). Left Side Brace (10) Lower Horizontal Tubing Left Side Brace (10) Lower Horizontal Tubing Threaded Bolt with Washer (5 and 6) Each Side Brace is secured to the lower horizontal tubing with two threaded bolts with washers attached as shown above. 2. Note how the Side Braces fit above the truck bed (see photo below).
photo below). The included Locking Plate is maneuvered down into the stake pocket and turned horizontal so it will accept the attachment Bolt (inserted with washer from the top, and locked in place with nut from the bottom). Drilling of a hole is required on each side of the top lip of the truck bed to accept a second attachment bolt (see photo above). These same procedures will secure the other side brace. Locking plate (4) 4.
Explosion diagram and parts list Part Description Quantity Part Description Quantity 1 End Cap 2 6 Bolt (short) 4 2 Rack Frame 1 7 Bolt (long) 4 3 Right Side Brace 1 8 Spring Washer 4 4 Locking Plate 4 9 Nut 4 5 Washer 12 10 Left Side Brace 1
