Manual

ADDITIONAL FEATURES (continued)

Programming the Remote Control

1. Remote - control switchover

Press the TV. VCR/DVD, SAT/CAB or AUX button to select the device you want to control.

2. To program the remote control

1. Press and hold the TV, VCPJDVD, SATICAB or AUX button for over 2 seconds until the iNDiCATOR on

the remote control turns off. Release the button (the INDICATOR will light again) and the remote control

enters the PROGRAMMING mode.

2. Use the 0 - 9 buttons to enter three - digit code number for your equipment, if the correct code number

is entered, the INDICATOR blinks three times. If you enter a code not listed below, or you press any

other buttons than SEARCH and 100 +, the INDICATOR turns off.

3. DVD codes

Code No. Model.No Code.No ModeLNo

AD1000 AD1200 AD 1500 AD1600 AD500 AD500B

AD500W AD500WM AD600A AD703A AD5131

00 05 MDI00

ADI700M

01 AD 1000W 06 AD800

02 AD7701 07 AT-100W

03 AD3201 08 AD2100

04 AD660 AD700

4. Descriptions of the buttons

1) Buttons for TV and DVD: (_) ,0-9, 100+, VIDEO/SHIFT, VOL-,VOL+,CH-/PREV, CH+/NEXT,

DISPLAY,MUTE, MENU, <--,-_ , J. and _"

2) Buttons for DVD only: PLAYIENTER,STOP, PAUSE,OPEN/CLOSE,REV, FWD,SETUP, ENTER

3) Buttons for TV only: RECALL, SCAN,PICTURE,SOUND,STEREO,TIMER,CC

Note: The REV, FWD.VOL-, VOL + buttons don't function for the device marked with *.