Manual

BASIC FUNCTIONS (continued)
Tuning in
This section gives descriptions about adjustment of items in the Tuner menu.
1.Auto program
1)Press the J,/ 1" buttons to highlight'Auto Program".
Tuner
Channel 2
Add,1£rase Add
Antenna Air
Auto Pn0gfam
2)Press the -.) button, and the TV will search automatically in sequence, After auto search, the TV will store
receivable channels and return to the lowest channel number.
During auto program, press the (-- button to stop searching.
Notes:
After auto program, there may be some repeated channels or infedor signal received, le thes case,
press any of the _-- / -i_, Channel Number buttons to select one of the channels. Then set Add/
Erase to Erase so that pressing the CH - / + buttons can not call up the channels. To resume the
channels, set Add/Erase to Add in the way mentioned above.
(_ When Antenna is set to the Air mode, the TV will auto search from channel number 2 to 69; when set to
the Cable mode, it will auto search from 1 to 125 (of which 2 -13 channels in the Air and Cable modes
are the same.)
2.Channel selection
Press the & / 1" buttons to highfight" Channel" inthe Tuner menu, and press any of the _- / .-),
Channel Number buttons to select channel numbers.
3,Add/Erase selection
Press the _. / 1" buttons to highlight "Add / Erase', and press the _- / --) buttons to select "Add "or
=Erase" cyclically.
16