Manual

BASIC FUNCTIONS
Power On/Off
1.Power on
Plug in the supply socket, and press the MAIN POWER SWITCH on the TV to enter the Power On mode.
2.Standby
When in the Power On mode. press the (i) button on the remote control to enter the Standby mode. At
this time, part of circuit on the TV set remaims active.
In the Standby mode, press the _tj button on the remote control to enter the Power On mode.
3.Power off
When in the Power On or Standby mode, Press the MAIN POWER SWITCH on the TV to turn off the power
supply of the TV set.
Note:
Avoid switching the TV on and off frequently. Doing so may shorten life span of internal components.
Auto off when no signal received
When a channel has no signal (e.g.program is over) and if no button is pressed within 15 minutes, the TV
will automatically enter the Standby mode. If the Off Time is preset and the time left is tess than I5 minutes,
the TV will carry out the Off Time program prior to the auto*off.
On - Screen Display
Press the DISPLAY button repeatedty in the TV or Video mode to display the current mode on the screen
and turn off the display respectively.
Press the DISPLAY button first and the TV screen is displayed as follows.
2
Air
.J--
MTS: Stereo [ S ] O)
_eol
In the "IV mode
In the Video mode
Note:
With other OSD, pressing the DISPLAY button first can turn it off.
15