Instructions / Assembly

Page 5Rev. 011019
DiscountRamps.com • 1-888-651-3431
Step 5. Place the truck rack on the bed of the pick-up truck. Adjust the supporting legs (8) to the ap-
propriate distance, and secure with bolt set (D). Make sure all hardware is secure. If using with a truck
cap, apply the foam cap tape (9) onto the truck bed rails in between the ladder ramp brackets. This
will help ll in the gap between the truck bed and truck cap created by the brackets. Once the tape is
installed, install the truck cap onto the truck bed.
Fig. 5
Fig. 4 (cont.)
install foam
cap tape