Product Manual

26
- Part of the accessories kit can be found in the cord storage compartment.
- When the appliance has just been started up, condensation can occur in the cold
accessories. Before cleaning, adjust the steam in position 2-3 and depress the trigger
for a few seconds to drain any condensed steam that may be in the hose.
- Never use the appliance to clean materials that are not heat-resistant.
- Never leave the steam switch in position 3 IRU long usage. Position 2 is the standard
setting, it is sufficient for most tasks and consumes less energy.
- If the soiled area is difficult to clean, it will require more time and more cloths during
the cleaning process.
120V 60Hz
170 0 watts
72 psi
Nominal Voltage
Nominal power
Steam pressure
Appliance Specifications
Dimensions:
Height
Width
Length
Pover cord
Body material
Boiler material
No. of switches
Steam adjustments
No water signal
10 inches
11inches
17 inches
13 feet
Plastic
304 stainless steel
(dual main boiler)
2 on the handle, multiple on unit
3 settings on the handle
Indicator light on the unit
- Always switch off the heating switch.
- Let all the steam escape: the safety/refiller cap will not open otherwise.
- Switch the main switch off.
- Unplug from the outlet
- Before storing, let the unit cool down completely.
- If you do not intend to use the appliance for 2 weeks, GUDLQ any remaining water in
the unit as described in the “Descaling” instructions above.
After Cleaning
GENERAL INFORMATION
SPECIFICATIONS